.290 7.37 .250 6.35 .198 5.03 .127 3.23 .591 15.01 when assembled 1.372[34.85] marking: kings+2065+cable code+ date code+lacation code see note 8 .138 3.51 .354 8.99 .748 19.00 recommended cable trim dimensions catalog p/n: 2065-e00-3cw01n notes: unless otherwise specified 1. for general series specifications, see sdprf-206. 2. material specifications: bayonet sleeve, body, contact, ferrule: brass per astm b16 insulator: teflon per astm d1710 spring washer, outer contact: beryllium copper, astm-b-194 gasket: silicone rubber 3. finish specifications: bayonet sleeve, body, ferrule: .000100min nickel per ams-qq-n-290 over copper flash per astm b734 (rohs) contact: .000030 min. gold per astm b488, over nickel per ams-qq-n-290 (rohs) all other metal parts: .000050min nickel per ams-qq-n-290 over copper flash per astm b734 (rohs) 4. contact and ferrule shipped loose 5. for use with tachii cable tcx-3cfws or equivalent. 6. for crimping use kings tool kth-5000 and die kth-5006( .248 hex, .054 square flat) 7. assemble to cable using cap-e01. 8. these area have white marking. 9. electrical specifications: impedance: 75 ohms. frequency range: dc-3ghz. return loss: 26db min at dc-3ghz. a bnc 75 ohm plug for tachii tcx-3cfws cable (rohs compliant) rev c sd2065-e00-3cw01 w inches ? er e lec ? ronics winchester electronics corporation 62 barnes industrial road north wallingford, connecticut 06492 ctc cy 11/11/09 by date appd revised per ecr-er18920 description c rev 03/21/08 dcam date approved 03/21/08 wpm date approved 03/21/08 rfa date approved 03/20/08 kev date drawn customer drawing per asme y14.5m-1994 unless otherwise specified: dimensions are in inches [mm] tolerances: decimal: .xx [x.x] .01 [0.3] .xxx [x.xx] .005 [0.13] .xxxx [x.xxx] .xxxx angles: 2 scale: 2:1 1 sht of 1 ? ?
|